Rear Brake Pads Z Compound

Fitment
Subaru Impreza WRX STi R205
Subaru Impreza WRX STi S206
Subaru WRX STi S207

To Suit Subaru Brembo 4 Piston Rear Calipers

Dixcel Type Z compound is the ultimate compound for B Road Blasting and occasional track days. Ideal for b road/fast road driving, Work great from cold 0c up to max temp range of 850c. Road driving will never see this kind of high temps so perfect for any power B road weekend car. A lot of brake pad manufactures say their fast road pads can be used on track too but this is rarely the case, however, these Z rated pads can actually hold up to the abuse of track driving (we have personally used these at the nurburgring and had 0 brake fade all weekend) but when on track these do reach 750c+ and tend to leave a lot of pad material on the discs which causes vibrations under hard braking once they cool back down the material comes off the discs and the vibration disappears. This doesnt happen on road driving only track. These are a soft compound pad designed to wear quicker than the discs and do create a bit of brake dust. These use a graphite metallic metal compound with a fraction rating of  Max. μ:0.67／Ave. μ:0.57／Min. μ:0.50

Bedding in procedure (recommended for track)
When using a new disc for the first time on a circuit, start with 50% braking for about 5 minutes and then go back to the pit once and take at least 5-minute intervals. Then, repeat 70～80% braking for about 10 minutes. Pit in again and take an interval of about 10 minutes. Finally, gradually increase from 80% to 100% braking, and the bedding-in of discs on a circuit is completed.

Z compound pads will suffer brake fade during the bedding in procedure but this is perfectly normal, once cooled back down they will be bedded in
RA compound pad, bedding in is only recommended on track, these will not suffer any brake fade but will smoke during the bedding in period